GLOBAL AGRICULTURAL TECHNOLOGY & ENGINEERING LLC
Home	CFValve™	AG Division	Industrial Division	Tests and Evaluations	Contact Us	Related Links
Page one	Page two	Page three	Page four	Page five	Page six

INSTALLATION INSTRUCTIONS
1. Unscrew nozzle. Check the screen to make certain it is clean. Replace the screen.                     Nozzle                   Screen         CFValve™           Wand End 2. Install the CFValve™ with screen firmly in place. 3. Screw the nozzle onto the CFValve™. Nozzle         CFValve™         Wand End
What to expect: With the CFValve™ correctly installed pumping will be easier. Fewer strokes and less physical effort are necessary to effectively apply chemicals. Do not pump too hard or too quickly. Only two or three strokes of the pump will be necessary to commence spraying. Then, one or two strokes for every few steps will automatically maintain a constant flow at the correct pressure.
Note: Some knapsacks have an adjustable pressure relief valve in the tank. If there is one on the equipment in use, please make sure that the setting is on the high mark. This allows the valve to store the high pressure and eliminates any unnecessary pumping action.	Knapsack w/CFValve™ installed
Cleaning: Always flush equipment with clean water after each use. Leave the CFValve™ in place on the wand to flush the knapsack and CFValve™ Do not store your equipment with pressure in the system.. To release the pressure at the valve after flushing, stop the pumping and/or close the trigger. Unscrew the CFValve™ take it off. Then open the trigger to empty the system. Replace the CFValve™ to make ready for the next application.